Designing toshibas notebook computer line

Taking a look at the excel spreadsheet and all of the 3 processing times at each station it can be seen that the hold up in processing is at station 9 during the software load Jacobs and Chase, The line could accommodate up to 12 operators if there was a need.

On a shelf above theconveyor, portable computers display the operations that are performed at each station.

CASE: Designing Toshiba’s Notebook Computer Assembly Line

The first operator lays out the major components of a computer between two white lines on the conveyor. In words, the following is a brief description of what each operator does: Toprepare for the hardware test, an operator inserts a memory card into the USB port containing software designed to test different components of the computer circuitry.

A typical production schedule included seven or eight model types in lot sizes varying from 10 to units. To achieve a lower cycle time for the line, the hardware test is performed in parallel on three different units.

Fundamentals of human resource management, 10th Ed. With every new model introduced, management felt that the assembly line had to increase productivity and lower costs, usually resulting in changes to the assembly process.

How should the line be redesigned to operate at the target units per day, assuming that no overtime will be used? Therefore we divide second by 3 and get 69 seconds.

There is a total of seconds for software load but this step is conducted at the same time on three separate products.

Pushing out units per day cannot be done with just one single assembly line with workers only operating on a 7. The shock test the last operation on the assembly line tests the ability of the computer to withstand vibrations and minor impacts. The second operator enters the bar codes on those components into a centralized computer system by scanning the bar codes with a hand-held scanning wand.

Toshiba is a company this is known for being a global force in its industry. Thank you for choosing us. The assembly line consisted of a All the units of the first model were assembled, followed by all the units of the second, and so on.CASE: Designing Toshiba’s Notebook Computer Assembly Line Toshihiro Nakamura, manufacturing engineering section manager, examined the prototype assembly.

Designing Toshiba's Notebook Computer Line Summary: Toshihiro Nakamura, manufacturing engineering section manager, examined the prototype assembly process sheet for the newest subnotebook computer model.

Designing Toshiba's Notebook Computer Assembly Line Case Study

Global Supply Chain Management Case report Analytic exercise: Designing a Manufacturing Process Toshiba´s Notebook Computer Assembly Line Whenever a new model is introduced at Toshiba, management attempts to improve the assembling process in terms of increasing productivity and decreasing costs.

Designing Toshiba's Notebook Computer Assembly Line Case Study; of 6 × Share & Embed. Embed Script. Size (px) Start Page. URL. Close. Designing Toshiba's Notebook Computer Assembly Line Case Study.

Published on January | Categories: Documents | Downloads: 33 3 Line Notebook Pages. Assembly Line Management 2.

Assembly Line Balancing. designing toshiba’s notebook computer assembly line Toshihiro Nakamura, examined the prototype assembly process sheet for the newest subnotebook computer model. 2 CASE DESIGNING TOSHIBA’S NOTEBOOK COMPUTER LINE Production of the subnotebook was scheduled to begin in 10 days.

Initial production for the new model was to be at units per day, increasing to units per day the following.

Download
Designing toshibas notebook computer line
Rated 0/5 based on 75 review